Scope Drying and Tracking Cabinet

The 19.25”-deep scope drying and tracking cabinet comes in 3 widths and 3 heights and with solid-front or tempered glass doors. It includes a  scope drying and tracking unit, fan ventilation unit, humidity and temperature sensor, filter and tubes, and 10” touchscreen. The easy-to-operate system continuously filters air into internal scope channels to efficiently and thoroughly dry scopes and features timed drying and venting cycles and scope tracking management. HEPA filtered air removes 99.9% of particles less than 0.1µm. The drying system works with all major endoscope brands. Cabinet has a 4″-high toe kick.

Remotely monitor scope drying, tracking, and storage with InnerSpace Cloud services, which includes pre-loading of data, configuration of products after installation, and onsite and on-demand training. Streamline scope drying with the security and automation option to add a locking system and barcode scanning process.

Contact a Rep

Dimensions (Nominal)

Exterior (Interior), Scope hanging length

  • 26.75″w x 19.25″d x 48″h (25.25″w x 17″d x 46.5″h); 35″ maximum
  • 26.75″w x 19.25″d x 60″h (25.25″w x 17″d x 54.5″h); 46″ maximum
  • 26.75″w x 19.25″d x 92″h (25.25”w x 17”d x 86.5”h), 78” maximum
  • 36″w x 19.25″d x 92″h (34.5”w x 17”d x 86.5”h), 78” maximum
  • 40”w x 19.25”d x 92”h (38.5”w x 17”d x 86.50”h), 78” maximum

Interior Configuration

  • 48”h and 60”h x 26.75”w cabinet holds 5 scopes
  • 92”h x 26.75”w cabinet holds 5 or 10 scopes
  • 92”h x 36”w cabinet holds 8 or 16 scopes
  • 92”h x 40”w cabinet holds 9 or 18 scopes

Specifications

Compressor air output:

The drying system has a maximum PSI of 4 with an average PSI between 2.5 and 3. The flowrate is approximately 269L per a 10-minute drying cycle. Air flowrate will vary depending on the size of the endoscope.

  • up to 45 LPM

Compressor decibels:

  • 62 dB, with doors closed

Electrical requirements for drying and tracking unit:

  • 120 VAC, 60Hz, 15-amp standard duplex receptacle
  • Includes a hospital-grade, UL-approved, 125V, 10-amp, 10-foot-long power cord with Y-splitter to power both the drying and tracking unit and the fan unit

Electrical requirements for cabinet fan ventilation unit (SFVU):

  • Voltage Rating: 115VAC
  • Watts: 13.0W
  • Amps: 0.19A

Temperature / Humidity Sensor:

  • Normal range: 72?F-78?F (22?C-26?C)
  • Maximum relative humidity level: 60%; levels above 60% are out of range

Materials and Finishes

Compressor: Powder-coated steel
Manifold: Powder-coated steel
Tubing: Soft PVC
Compressor tube and air filter: Soft PVC tube and polypropylene filter
Connectors (vary by type):  HDPE, white nylon, white polypropylene, and clear polycarbonate

Cabinet shell:

  • AireCore: Aluminum composite with Glacier White finish or specified Wilsonart, Formica, or Pionite standard laminate
  • AireCore with Brushed Aluminum finish: Aluminum composite with Brushed Aluminum finish
  • Stainless Steel: 18-gauge 304 stainless steel with 18% chrome and 8% nickel analysis; exposed surfaces

Edge banding:

  • AireCore with Brushed Aluminum finish: Brushed Aluminum acrylic

Solid-front doors:

  • AireCore: Aluminum composite with Glacier White finish or specified Wilsonart, Formica, or Pionite standard laminate
  • AireCore with Brushed Aluminum finish: Aluminum composite with Brushed Aluminum finish
  • Stainless steel: 18-gauge 304 stainless steel with 18% chrome and 8% nickel analysis

Glass-front doors:

  • AireCore: Aluminum composite with Glacier White finish or specified Wilsonart, Formica, or Pionite standard laminate with tempered glass and clear anodized aluminum trim
  • AireCore with Brushed Aluminum finish: Aluminum composite with Brushed Aluminum finish with tempered glass and clear anodized aluminum trim
  • Stainless steel: 18-gauge 304 stainless steel with 18% chrome and 8% nickel analysis and tempered glass

Hinges:

  • AireCore and AireCore with Brushed Aluminum cabinet: Metal concealed European-style
  • Stainless steel cabinet: Stainless steel

Door pulls:

  • AireCore and AireCore with Brushed Aluminum cabinet: Dull chrome-plated steel bow pull
  • Stainless steel cabinet: 5” stainless steel bow pull
  • Solid-front and glass door on 92”h cabinet; 48” and 60”h cabinets have glass door only
  • Door can be hinged on right or left side of 26.75”w cabinet
  • Sloped top
  • 6” toe kick
  • InnerSpace Cloud services are available to customers who purchase Ventaire Endoscopy System scope drying and tracking products
  • Security and automation feature for automatic locking/unlocking and streamlined check-in and drying process

Order replaceable products separately. Replace every 6 months for optimal performance.

  • Compressor tube/air filter replacement, pkg of 1: SVCTAF
  • Triple manifold tube, pkg of 1: SVTMT
  • Manifold tube, pkg of 1: SVMT1
  • Manifold auxiliary water tube, pkg of 1: SVWAT1
  • Replacement HEPA filter:1 filter, SHEPFIL or 3 filters, SHEPFIL3

Order single-use connector kits separately. Click here to find the compatible connector kit for your endoscope.

  • Connector Kit 1, pkg of 100: SVCK1
    Includes connector and biopsy port cover
  • Connector Kit 2, pkg of 100: SVCK2
    Includes connector, biopsy port cover, and auxiliary water connector
  • Connector Kit 3, pkg of 100: SVCK3
    Includes connector and luer plug
  • Connector Kit 4, pkg of 100: SVCK4
    Includes connector, water jet adaptor, and luer plug
  • Connector Kit 5, pkg of 100: SVCK5
    Includes connector, biopsy port cover, and luer coupler
  • Connector Kit 7, pkg of 100: SVCK7
    Includes connector, luer plug, and auxiliary water connector
  • Connector Kit 8, pkg of 100: SVCK8
    Includes connector, biopsy port cover, and auxiliary water connector
  • Connector Kit 9, pkg of 100: SVCK9
    Includes connector, luer plug, and auxiliary water connector
  • Connector Kit 10, pkg of 100: SVCK10
    Includes connector and luer plug
  • Connector Kit 11, pkg of 100: SVCK11
    Includes connector
  • Connector Kit 12: SVCK12
    Includes connector, biopsy port cover, biopsy port connector, and auxiliary water connector

To order a scope drying and tracking cabinet, first specify the cabinet size, door type, material, and configuration, and then specify the drying and tracking unit.

Scope Cabinet

26.75″w x 19.25″d x 48″h

AireCore: SEA1927SGLW, SEA1927SGRW; AireCore with Brushed Aluminum: SEB1927SGLW, SEB1927SGRW; Stainless steel: SES1927SGLW, SES1927SGRW

26.75″w x 19.25″d x 60″h

AireCore: SEA1927SGLB, SEA1927SGRB; AireCore with Brushed Aluminum: SEB1927SGLB, SEB1927SGRB; Stainless steel: SES1927SGLB, SES1927SGRB

26.75″w x 19.25″d x 92″h

AireCore: SEA1927SGLS, SEA1927SGRS, SEA1927SSLS, SEA1927SSRS; with double scope holder: SEA1927SGLD, SEA1927SGRD, SEA1927SSLD, SEA1927SSRD; AireCore with Brushed Aluminum: SEB1927SGLS, SEB1927SGRS, SEB1927SSLS, SEB1927SSRS; with double scope holder: SEB1927SGLD, SEB1927SGRD, SEB1927SSLD, SEB1927SSRD; Stainless steel: SES1927SGLS, SES1927SGRS, SES1927SSLS, SES1927SSRS; with double scope holder: SES1927SGLD, SES1927SGRD, SES1927SSLD, SES1927SSRD

36″w x 19.25″d x 92″h

AireCore: SEA1936SGS, SEA1936SSS; with double scope holder: SEA1936SGD, SEA1936SSD; AireCore with Brushed Aluminum: SEB1936SGS, SEB1936SSS; with double scope holder: SEB1936SGD, SEB1936SSD; Stainless steel: SES1936SGS, SES1936SSS; with double scope holder: SES1936SGD, SES1936SSD

40”w x 19.25”d x 92”h

AireCore: SEA1940SGS, SEA1940SSS; with double scope holder: SEA1940SGD, SEA1940SSD; AireCore with Brushed Aluminum: SEB1940SGS, SEB1940SSS; with double scope holder: SEB1940SGD, SEB1940SSD; Stainless steel: SES1940SGS, SES1940SSS; with double scope holder: SES1940SGD, SES1940SSD

Scope Drying and Tracking Unit

When ordering a drying and tracking unit for a stainless steel cabinet, add an S to the beginning of the product number.

For 26.75”w x 48”h left-hinged cabinet

5-port unit: SVDUGL5W (for glass door cabinet)

For 26.75”w x 48”h right-hinged cabinet

5-port unit: SVDUGR5W (for glass door cabinet)

For 26.75”w x 60”h left-hinged cabinet

5-port unit: SVDUGL5B (for glass door cabinet)

For 26.75”w x 60”h right-hinged cabinet

5-port unit: SVDUGR5B (for glass door cabinet)

For 26.75”w left-hinged cabinet

5-port unit: SVDUSL5 (for solid door cabinet), SVDUGL5 (for glass door cabinet);
10-port unit: SVDUSL10 (for solid door cabinet), SVDUGL10 (for glass door cabinet)

For 26.75”w right-hinged cabinet

5-port unit: SVDUSR5 (for solid door cabinet), SVDUGR5 (for glass door cabinet);
10-port unit: SVDUSR10 (for solid door cabinet), SVDUGR10 (for glass door cabinet)

For 36”w cabinet

8-port unit: SVDUS8 (for solid door cabinet), SVDUG8 (for glass door cabinet);
16-port unit: SVDUS16 (for solid door cabinet), SVDUG16 (for glass door cabinet)

For 40”w cabinet

9-port unit: SVDUS9 (for solid door cabinet), SVDUG9 (for glass door cabinet);
18-port unit: SVDUS18 (for solid door cabinet), SVDUG18 (for glass door cabinet)

Reviews

There are no reviews yet.

Be the first to review “Scope Drying and Tracking Cabinet”

Your email address will not be published. Required fields are marked *

YouTube player
YouTube player